Komatsu PC200 Bucket Link Pin & Bushing Kit

Komatsu PC200 Bucket Link Pin & Bushing Kit

Restore worn bucket linkage with a complete Komatsu PC200 bucket link pin and bushing kit for PC200 excavators. This kit combines the major wear components needed to replace worn PC200 bucket pins, bucket bushings, bucket-link pins, H-link bushings, seals, shims, and grease fittings in one package.

Compra en WQC Parts repuestos aftermarket para Komatsu y partes de reemplazo por número de parte, incluyendo Komatsu PC200 Bucket Link Pin & Bushing Kit. Ordena en línea con soporte de compatibilidad para aplicaciones de equipos Komatsu.

Complete PC200 Bucket Pin & Bushing Kit

This Komatsu PC200 bucket pin and bushing kit includes:

• 2 bucket pins
• 2 bucket-link pins
• H-link bushings
• H-link dust seals
• All required shims
• Grease fittings

Pin-retaining bolts and nuts are not included. Existing retaining hardware may be reused if serviceable or replaced separately.

Komatsu PC200 Bucket Pins and Bushings

Wear at the bucket and H-link pivot points can create excessive clearance, side-to-side bucket movement, and linkage play. Replacing worn Komatsu PC200 pins and bushings helps restore proper fit at these heavily loaded pivot locations.

This kit provides a complete solution for customers looking for PC200 bucket pins, PC200 bucket bushings, PC200 bucket-link pins, PC200 H-link bushings, PC200 linkage pins and bushings, or a complete PC200 bucket pin kit.

European-Made Pins & Bushings

The pins and bushings used in this Komatsu PC200 bucket linkage kit are European-made for demanding Komatsu excavator applications.

The pins are manufactured from 42CrMo4 alloy steel and induction hardened to a surface hardness of 58–62 HRC to a depth of up to 5 mm. The bushings are precision ground on both the inside and outside diameters for accurate fit at the pin, bushing, and machine bore.

• Material del perno: 42CrMo4 alloy steel
• Tratamiento térmico: Induction hardened
• Dureza superficial: 58–62 HRC
• Profundidad de endurecimiento: Up to 5 mm
• Bujes: Precision ground I.D. and O.D.
• Fabricación: European-made

Fits Komatsu PC200 Excavadoras

This Komatsu PC200 bucket link pin and bushing kit is designed for applicable PC200 excavator series and configurations, including PC200-5, PC200-6, PC200-7, PC200-8, and corresponding PC200LC configurations.

Komatsu OEM números de parte may vary between PC200 series, but the applicable components cross-reference to the same bucket-link kit configuration represented by this product.

The model-specific fitment also supports searches for PC200-5 pins and bushings, PC200-6 bucket pins, PC200-7 bucket bushings, PC200-8 bucket pins and bushings, and PC200LC pins and bushings.

Complete PC200 Bucket Linkage Repair

Replacing only a worn bucket pin may not correct excessive linkage play when the mating bushings, H-link bushings, seals, or shims are also worn. This kit addresses the primary PC200 bucket and bucket-link wear points together.

The H-link bushings and dust seals help restore and protect the linkage pivots, the included shims provide proper assembly spacing, and new grease fittings allow the repaired pivot points to be properly lubricated after installation.

Aftermarket Komatsu PC200 Pins & Bushings

WQC Parts supplies high-quality aftermarket Komatsu excavator pins and bushings without OEM pricing. This PC200 kit combines European-made pins, precision-ground bushings, seals, shims, and grease fittings for a comprehensive bucket-linkage repair.

Aplicación: Komatsu PC200 and PC200LC excavators
Ubicación: Bucket and bucket-link / H-link pivot points
Tipo de producto: Bucket link pin and bushing kit
Material del perno: 42CrMo4 alloy steel
Dureza del perno: 58–62 HRC
Pernos y tuercas de retención: Not included

Repuestos Komatsu para mercados internacionales: WQC Parts apoya cotizaciones de repuestos aftermarket Komatsu por número de parte, modelo y aplicación. La disponibilidad, el precio y el envío se confirman al momento de la cotización.