{"title":"KOMATSU WA320PZ-6 SN H00051 - Up_LIFT ARM AND BELL CRANK","description":"\u003cp\u003eKOMATSU WA320PZ-6 SN H00051 - Up_LIFT ARM AND BELL CRANK from WQParts are organized to help buyers identify reliable aftermarket replacement parts by part number, equipment family, system, and application. This collection focuses on replacement parts, service components, hardware, wear parts, and related assemblies used to support repair, maintenance, and uptime across heavy equipment applications.\u003c\/p\u003e\n\u003cp\u003eHeavy equipment parts should be selected carefully because the same general description can apply to multiple machines, serial ranges, component groups, or diagram positions. Use this collection as a focused product group, then confirm the exact part number and machine details before ordering.\u003c\/p\u003e\n\u003ch2\u003eKomatsu Replacement Parts Applications\u003c\/h2\u003e\n\u003cp\u003eProducts in this collection may support construction, mining, quarry, forestry, utility, road-building, and fleet maintenance applications. Depending on the machine and component group, fitment may depend on model series, serial range, installed arrangement, hydraulic configuration, engine arrangement, attachment package, or work-equipment setup.\u003c\/p\u003e\n\u003ch2\u003eHow to Confirm Fitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSearch by the original part number when available.\u003c\/li\u003e\n\u003cli\u003eConfirm the machine model, serial range, and component location.\u003c\/li\u003e\n\u003cli\u003eCheck diagram position, quantity, and arrangement notes where parts-book information is available.\u003c\/li\u003e\n\u003cli\u003eCompare dashed and non-dashed part-number formats when searching.\u003c\/li\u003e\n\u003cli\u003eContact WQParts with the part number, model, serial number, and photos when fitment is uncertain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy Quality Matters\u003c\/h2\u003e\n\u003cp\u003eIncorrect or low-quality replacement parts can lead to premature wear, leaks, downtime, poor fitment, repeat repairs, and damage to related components. Properly matched aftermarket parts help protect machine uptime and reduce avoidable repair cost.\u003c\/p\u003e\n\u003ch2\u003eWhy Buy from WQParts?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAftermarket heavy equipment parts organized by part number, system, and machine family.\u003c\/li\u003e\n\u003cli\u003eSupport for alternate part numbers and practical fitment review.\u003c\/li\u003e\n\u003cli\u003eClear collection structure for faster product discovery.\u003c\/li\u003e\n\u003cli\u003eReliable sourcing focused on keeping equipment working.\u003c\/li\u003e\n\u003c\/ul\u003e","products":[{"product_id":"komatsu-20s-70-21470-spacer-10mm-km-20s-70-21470","title":"Komatsu 20S-70-21470 Spacer 10Mm","description":"\u003ch2\u003eKomatsu 20S-70-21470 Spacer 10Mm\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 20S-70-21470 Spacer 10Mm\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 20S-70-21470\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-20S-70-21470\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Spacer 10Mm\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 20S-70-21470 \/ 20S7021470\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA250, WA250L, WA320, WA320PZ, PC40, PW20, PW30, PW30T, PC20, PC25, PC25R, PC30, PC30R.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 70001-UP, 75001-UP (FOR NORTH AMERICA), 75001-UP, 75053-UP (NORTH AMERICA STANDARD MACHINE), 75053-UP, A73001-UP, 15035-UP, 60001-UP (OVERSEAS VERSION).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS, EXCAVATORS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42590421844064,"sku":"KM-20S-70-21470","price":13.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-01641-20608-washer-km-01641-20608","title":"Komatsu 01641-20608 Washer","description":"\u003ch2\u003eKomatsu 01641-20608 Washer\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 01641-20608 Washer\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for repair, assembly, and maintenance applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 01640-20610\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-01641-20608\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Washer\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 01641-20608 \/ 0164120608\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e 505, 507, 510, 512, 515, 518, 520B, 530, 530B, 532, 538, 540, 540B, 542, 545, 558, 560B, 568, BA100, BC100, and 1249 additional Komatsu models.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEquipment families:\u003c\/strong\u003e Backhoeloaders, Bulldozers, Crawler Stabilizers, Dump Trucks, Engines, Excavators, Excavators Kmg, Fork Lift, Motor Graders, Mobile Crushers And Recyclers, Other Equipment, Pipelayers, Road Cutters, Rollers, Scrapers, Skid Steer Loaders, Wheel Dozers, Wheel Loaders, Wheel Stabilizers, Whinches.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42591012978784,"sku":"KM-01641-20608","price":0.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-01596-00606-nut-km-01596-00606","title":"Komatsu 01596-00606 Nut","description":"\u003ch2\u003eKomatsu 01596-00606 Nut\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 01596-00606 Nut\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for repair, assembly, and maintenance applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e NUT-KM-01596\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-01596-00606\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Nut\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 01596-00606 \/ 0159600606\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e 518, 538, 542, 545, BR100JG, D375A, D375AI, D39EX, D39PX, D475A-5E0, D475ASD-5E0, GD675, GD750A, HD605, HD605-7E0, HD605-7E1, HD605-7R, HD785, HM250, HM300, and 194 additional Komatsu models.\u003c\/p\u003e   \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42591017205856,"sku":"KM-01596-00606","price":0.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-01010-81625-bolt-km-01010-81625","title":"Komatsu 01010-81625 Bolt","description":"\u003ch2\u003eKomatsu 01010-81625 Bolt\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 01010-81625 Bolt\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for repair, assembly, and maintenance applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e BOLT-KM-01010\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-01010-81625\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Bolt\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 01010-81625 \/ 0101081625\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e 545, BR100JG, BR210JG, CS210, CS360SD, D31EX, D31PX, D355C, D375A, D375AI, D37EX, D37EXI, D37PX, D37PXI, D39EX, D39EXI, D39PX, D39PXI, D475A, D51EX, and 254 additional Komatsu models.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eEquipment families:\u003c\/strong\u003e Bulldozers, Crawler Stabilizers, Dump Trucks, Excavators, Excavators Kmg, Fork Lift, Motor Graders, Mobile Crushers And Recyclers, Pipelayers, Wheel Dozers, Wheel Loaders.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42591044272224,"sku":"KM-01010-81625","price":2.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-424-70-11820-bushing-km-424-70-11820","title":"Komatsu 424-70-11820 Bushing","description":"\u003ch2\u003eKomatsu 424-70-11820 Bushing\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 424-70-11820 Bushing\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 424-70-11820\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-424-70-11820\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Bushing\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 424-70-11820 \/ 4247011820\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA320, WA320PZ, WA350, WA380, WA380Z, WA400, WA420, WA430, WA450, WA470, 538, 542.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 80001-UP, A36001-UP, 85001-UP, 70001-70451 (FOR EU), 70001-70451 (FOR NORTH AMERICA), 70001-70451, 70092 - 70187, 70452-UP (FOR EU).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593082212448,"sku":"KM-424-70-11820","price":100.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-419-t80-4821-pin-km-419-t80-4821","title":"Komatsu 419-T80-4821 Pin","description":"\u003ch2\u003eKomatsu 419-T80-4821 Pin\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-T80-4821 Pin\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-T80-4821\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-T80-4821\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Pin\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-T80-4821 \/ 419T804821\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA320, WA320PZ.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 80001-UP, A36001-UP, 85001-UP, 70001-70451 (FOR EU), 70001-70451 (FOR NORTH AMERICA), 70001-70451, 70092 - 70187, 70452-UP (FOR EU).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593084702816,"sku":"KM-419-T80-4821","price":217.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-419-t80-4841-pin-km-419-t80-4841","title":"Komatsu 419-T80-4841 Pin","description":"\u003ch2\u003eKomatsu 419-T80-4841 Pin\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-T80-4841 Pin\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-T80-4841\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-T80-4841\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Pin\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-T80-4841 \/ 419T804841\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA320, WA320PZ, WA450.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 80001-UP, A36001-UP, 85001-UP, 70001-70451 (FOR EU), 70001-70451 (FOR NORTH AMERICA), 70001-70451, 70092 - 70187, 70452-UP (FOR EU).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593085751392,"sku":"KM-419-T80-4841","price":718.35,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-419-70-31220-pin-km-419-70-31220","title":"Komatsu 419-70-31220 Pin","description":"\u003ch2\u003eKomatsu 419-70-31220 Pin\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-70-31220 Pin\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-70-31220\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-70-31220\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Pin\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-70-31220 \/ 4197031220\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA320, WA320L, WA320PT, WA320PZ.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 60001-UP (OVERSEAS VERSION), 60001-UP, B10001-UP, WA320-5H50051 - UP, 70001-70290 (ECOT 3), 70001-70290 (FOR NORTH AMERICA), 70291-UP (NORTH AMERICA STANDARD MACHINE), 70291-UP.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593090732128,"sku":"KM-419-70-31220","price":468.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/419-70-31220_2__komatsu-parts-online_68f29216-9111-4b47-a964-c5c37c2f5470.png?v=1771613532"},{"product_id":"komatsu-419-70-31810-bushing-km-419-70-31810","title":"Komatsu 419-70-31810 Bushing","description":"\u003ch2\u003eKomatsu 419-70-31810 Bushing\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-70-31810 Bushing\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-70-31810\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-70-31810\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Bushing\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-70-31810 \/ 4197031810\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e D355A, D85A, WA320, WA320L, WA320PT, WA320PZ, WA350, WA380, WA400, WA420, WA450, WA470, PC250LC, PC300.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 1010-UP, 36537-UP (CUSTOM S6D125E-2 (EMISSION) ENG. INSTALLED), 36537-UP, 60001-UP (OVERSEAS VERSION), 60001-UP, B10001-UP, WA320-5H50051 - UP, 70001-70290 (ECOT 3).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e BULLDOZERS, WHEEL LOADERS, EXCAVATORS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593091813472,"sku":"KM-419-70-31810","price":147.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/419-70-31810_2__komatsu-parts-online_21f3925e-8615-414b-9b62-10ec74b45acb.png?v=1771613548"},{"product_id":"komatsu-419-70-31870-bushing-km-419-70-31870","title":"Komatsu 419-70-31870 Bushing","description":"\u003ch2\u003eKomatsu 419-70-31870 Bushing\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-70-31870 Bushing\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-70-31870\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-70-31870\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Bushing\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-70-31870 \/ 4197031870\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA320, WA320L, WA320PZ, WA380.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 60001-UP (OVERSEAS VERSION), 60001-UP, B10001-UP, WA320-5H50051 - UP, 70001-70290 (ECOT 3), 70001-70290 (FOR NORTH AMERICA), 70291-UP (NORTH AMERICA STANDARD MACHINE), 70291-UP.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593092075616,"sku":"KM-419-70-31870","price":329.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/419-70-31870_2__komatsu-parts-online_b69edc9c-de23-4885-b1cb-a7ebc84aca5e.png?v=1771613551"},{"product_id":"komatsu-419-70-21810-bushing-km-419-70-21810","title":"Komatsu 419-70-21810 Bushing","description":"\u003ch2\u003eKomatsu 419-70-21810 Bushing\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-70-21810 Bushing\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-70-21810\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-70-21810\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Bushing\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-70-21810 \/ 4197021810\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA250PZ, WA270, WA300, WA300L, WA320, WA320AVANCECUSTOMSERIALNO.20001ANDUP, WA320L, WA320PT, WA320PZ, WA800, WA900, WA350, WA380, WA400.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e H50051 - UP, 75001-75749 (FOR EU), 75001-75749 (FOR N.AMERICA), 75001-75749, 75160 - 75467, 75750-UP (FOR EU), 75750-UP (FOR N.AMERICA), 75750-UP.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593093156960,"sku":"KM-419-70-21810","price":145.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-419-70-11890-bushing-km-419-70-11890","title":"Komatsu 419-70-11890 Bushing","description":"\u003ch2\u003eKomatsu 419-70-11890 Bushing\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-70-11890 Bushing\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-70-11890\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-70-11890\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Bushing\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-70-11890 \/ 4197011890\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA250, WA300, WA300L, WA320, WA320AVANCECUSTOMSERIALNO.20001ANDUP, WA320L, WA320PT, WA320PZ, WA500, WA250L, WA250PT, WA250PTL, WA250PZ, WA270, 558, 532.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 10001-UP, A65001-UP, 10001-UP (OVERSEAS VERSION), 53001-UP, S\/N 53001-UP, 50001-52999, 51001-UP, 53001-UP (FOR NORTH AMERICA).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593095385184,"sku":"KM-419-70-11890","price":143.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"},{"product_id":"komatsu-419-t80-4831-pin-km-419-t80-4831","title":"Komatsu 419-T80-4831 Pin","description":"\u003ch2\u003eKomatsu 419-T80-4831 Pin\u003c\/h2\u003e \u003cp\u003e\u003cstrong\u003eKomatsu 419-T80-4831 Pin\u003c\/strong\u003e is a WQC Parts aftermarket replacement part for Komatsu heavy equipment. It is intended for pivot, linkage, and work equipment applications where the part number, machine model, and serial range match the required application.\u003c\/p\u003e  \u003ch3\u003ePart Information\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e \u003cstrong\u003eKomatsu part number:\u003c\/strong\u003e 419-T80-4831\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eWQC SKU:\u003c\/strong\u003e KM-419-T80-4831\u003c\/li\u003e \u003cli\u003e \u003cstrong\u003eProduct type:\u003c\/strong\u003e Pin\u003c\/li\u003e  \u003cli\u003e\n\u003cstrong\u003eSearch reference:\u003c\/strong\u003e 419-T80-4831 \/ 419T804831\u003c\/li\u003e \u003c\/ul\u003e  \u003cp\u003e\u003cstrong\u003eCommon machine models include:\u003c\/strong\u003e WA320, WA320PZ, WA350, WA380, WA400, WA420, WA450, WA470.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported serial ranges include:\u003c\/strong\u003e 80001-UP, A36001-UP, 85001-UP, 70001-70451 (FOR EU), 70001-70451 (FOR NORTH AMERICA), 70001-70451, 70092 - 70187, 70452-UP (FOR EU).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReported category\/application areas:\u003c\/strong\u003e WHEEL LOADERS.\u003c\/p\u003e  \u003ch3\u003eFitment Notes\u003c\/h3\u003e \u003cp\u003eAlways confirm final fitment before ordering. The same general part description can apply to different Komatsu models, serial ranges, component groups, or diagram positions. Verify the original part number, machine model, serial number, and installed arrangement before purchase.\u003c\/p\u003e  \u003ch3\u003eWhy Buy from WQC Parts?\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAftermarket Komatsu replacement parts organized by part number and product type.\u003c\/li\u003e \u003cli\u003eSupport for fitment review using machine model, serial number, and photos when needed.\u003c\/li\u003e \u003cli\u003eCompetitive pricing for repair shops, equipment owners, and fleet maintenance teams.\u003c\/li\u003e \u003cli\u003eReliable sourcing focused on reducing downtime and keeping machines working.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eIf you are unsure whether this part fits your machine, contact WQC Parts with your model, serial number, and existing part number before ordering.\u003c\/p\u003e","brand":"WQC","offers":[{"title":"Default Title","offer_id":42593096466528,"sku":"KM-419-T80-4831","price":438.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0660\/2922\/4032\/files\/komatsu-parts-worldwide.png?v=1769344708"}],"url":"https:\/\/wqcparts.com\/fr\/collections\/komatsu-wa320pz-6-sn-h00051-up_lift-arm-and-bell-crank.oembed","provider":"WQC PARTS","version":"1.0","type":"link"}