Komatsu 07435-66050 Gear

Komatsu Pin Specifications & Fitment

What it is: Heavy-equipment pin designed for tight-tolerance pivot joints where wear control and alignment matter.

• Part number: See title
• SKU: KM-07435-66050
• Typical use: Boom/arm/bucket linkages, work equipment pivots, and high-wear joints.

Key measurements to confirm

To ensure correct fit, match the following measurements to your machineTMs worn component or OEM spec:

• Inside Diameter (ID): ___
• Outside Diameter (OD): ___
• Overall Length: ___

Quality notes

• Designed for consistent clearance and long service life when installed with proper lubrication.
• Replace pins and bushings as a set when wear is uneven to prevent premature failure.

Installation tip

Measure the bore, pin, and bushing after press-fit. Use proper tooling and lubrication, and re-check end-play after assembly.

Need help confirming dimensions? Send your machine model and the measurements above and weTMll verify fitment.

Komatsu maintenance notes (quick guide)

• Early-life greasing: For excavators, Komatsu guidance calls for greasing work equipment pins every 10 hours for the first 50 hours, and greasing again after water work.
• Clearance control: Komatsu linkage manuals commonly specify pinbushing clearance targets and a typical service limit around 1.0 mm for many joints, often managed with shims.
• Tracked machines: For undercarriage track joints, pin/bushing turning is condition- and wear-window dependent; abrasive sites can accelerate wear substantially.